Determination of phosphorus, sulfur and the halogens using high-temperature molecular absorption spectrometry in flames and furnaces???A review

Title Determination of phosphorus, sulfur and the halogens using high-temperature molecular absorption spectrometry in flames and furnaces?��A review
Author: Welz, Bernhard; Lepri, F\'{a}bio G; Araujo, Rennan G O; Ferreira, S\'{e}rgio L C; Huang, Mao-Dong; Okruss, Michael & Becker-Ross, Helmut
Analytica Chimica Acta, 2009
2009
http://www.sciencedirect.com/science/article/pii/S000326700900823X
More details: The literature about the investigation of molecular spectra of phosphorus, sulfur and the halogens in flames and furnaces, and the use of these spectra for the determination of these non-metals has been reviewed. Most of the investigations were carried out using conventional atomic absorption spectrometers, and there were in essence two different approaches. In the first one, dual-channel spectrometers with a hydrogen or deuterium lamp were used, applying the two-line method for background correction; in the second one, a line source was used that emitted an atomic line, which overlapped with the molecular spectrum. The first approach had the advantage that any spectral interval could be accessed, but it was susceptible to spectral interference; the second one had the advantage that the conventional background correction systems could be used to minimize spectral interferences, but had the problem that an atomic line had to be found, which was overlapping sufficiently well with the maximum of the molecular absorption spectrum. More recently a variety of molecular absorption spectra were investigated using a low-resolution polychromator with a \{CCD\} array detector, but no attempt was made to use this approach for quantitative determination of non-metals. The recent introduction and commercial availability of high-resolution continuum source atomic absorption spectrometers is offering completely new possibilities for molecular absorption spectrometry and its use for the determination of non-metals. The use of a high-intensity continuum source together with a high-resolution spectrometer and a \{CCD\} array detector makes possible selecting the optimum wavelength for the determination and to exclude most spectral interferences. Halogens,Molecular absorption spectrometry,Non-metals determination,Phosphorus,Sulfur